NMD NJOY PE
$199.95
$199.95
$199.95
$199.95
BODYBOARD SIZE
36"
38"
40"
Colour
PINK DECK | WHITE SLICK
BODYBOARD SIZE
Colour
PINK DECK | WHITE SLICK
Description
Board Tech
Core - 2.4lb Polyethylene
Stringer - 1 x EXT Stringer
Rails - 55/45 Double Rails
Channels - Slotted
Slick - HDPE
Deck - IXLPE Crosslink
Tail - Clipped Crescent
Additional Features - XFL Armour, Nose Bulbs , Buzz Tech Lamination.
Stringer - 1 x EXT Stringer
Rails - 55/45 Double Rails
Channels - Slotted
Slick - HDPE
Deck - IXLPE Crosslink
Tail - Clipped Crescent
Additional Features - XFL Armour, Nose Bulbs , Buzz Tech Lamination.
Board Technology Index
Core : Polyethlene 2.4 PE The industry standard since day one, extruded 2.4lb PE (Polyethylene) offers a medium density core with a softer flex, perfect for riders learning the fundamentals of boarding in all conditions.
Stringer:EXT Stringers are high-strength, pultruded composite-fibre tubes for increased stiffness and board life.
Rails: This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
Channels: Slotted channels are simply the channelled slots which run on the slick side at the tail end of the board.The slots redirect waterflow and offer the rider lift in the tail.
Slick: HDPE, or HD is a very hard wearing, high-density polyethylene slick bottom skin for improved board stiffness and speed.
Deck: IXLPE DECK SKINS Irradiated crosslink Polyethylene outer skins feature a super-fine cell structure with less than 1% water absorption.
Tail: Crescent Tail is the most popular crescent tail option. This tail will perform when driving, turning, carving and releasing.
XFL ARMOUR: Heat laminated Crosslink foam forms
the inner rails and nose and tail armour, encapsulating the full inner perimeter of the board for premium seam strength and impact protection.
the inner rails and nose and tail armour, encapsulating the full inner perimeter of the board for premium seam strength and impact protection.
BUZZ-TECH LAMINATION: Buzz-Tech process hot air lamination system thermo-fuses the outer skins to
the core with calibrated pre and post-set rocker tension for optimum board recoil and projection.
the core with calibrated pre and post-set rocker tension for optimum board recoil and projection.
Slick Nose Bulbs: Raised nose grips shaped into the corners of the Surlyn ergonomically formed for fingertip control.